Sichuan Tengma Technology Development Co., Ltd.
Contact: Manager Ma
Contact address: South section of Shaoshan Road, Industrial Concentration Development Zone, Jingyang District, Deyang City, Sichuan Province
| FRP grille manufacturers produce product advantages |
| I. Corrosion resistance: FRP gratings produced by FRP grating manufacturers have excellent corrosion resistance, and can resist many degrees of corrosion of gases, liquids, such as acids, alkalis, organic solvents, and salts. The plastic grid is low, so its corrosion resistance is slightly worse than that of the molded grid. According to the requirements of actual application occasions, it can be economically selected to use o-benzene, m-benzene and vinyl resins as matrix data. |
2. Lightweight and high-strength: FRP grille is made of glass fiber, continuous felt, exterior felt and other reinforced materials by resin soaking and pultrusion. The high glass fiber content (above 60%) makes the unidirectional specific strength and specific stiffness quite outstanding.
3. Flame retardant: The oxygen index of general glass fiber reinforced plastic grid is above 33, and the flame transmission rate (according to ASTM E-84 test) is less than 25, which is the first class of flame retardant and has been approved by the American Bureau of Shipping (ABS); The squeeze grid has an oxygen index (GB8924) of 100, an ASTM E-84 test with a flame transfer rate of 5 and a smoke density of 10.
Fourth, impact resistance and fatigue resistance: FRP grids have the same high impact strength as molded grids, allowing repeated bending without permanent deformation; with moderate elasticity, it makes people who work on it for a long time feel comfortable.
V. Anti-skid: The appearance of FRP grille has pre-designed linear anti-skid grooves, and the rated anti-skid effect can be increased by sanding with adhesive.
6. Aging resistance: The FRP grille is made of high-quality resin and fiberglass system to ensure that the service life of the product is more than 20 years. After atmospheric exposure, although the appearance has changed, the intensity can be maintained above 85% after 20 years.
7. Beautiful and easy to maintain: The glass fiber reinforced plastic grid is also made by blending color paste into all resins, and its color is bright, it is not easy to fade, no paint is needed, and it has a self-cleaning effect.
8. Safety: FRP grille and molded grille also have excellent electrical insulation, no electromagnetic properties and no electric sparks. They are used in working areas with conductive hazards, magnetically sensitive equipment, and flammable and explosive places. Has better economic benefits. The production process of the FRP grille is selected for automatic control, and the product quality is stable; FRP grille manufacturers basically do not generate corner waste during the process, the original data is highly useful and efficient; the production efficiency is high, and the labor cost is low; the length of the product can be intentionally cut as required , Standard sizes can be varied, and cutting waste is small.
FRP grille manufacturers introduce the scope of products:
Purpose Sewage treatment, water supply and drainage, chemical petroleum, electric power, papermaking, engineering construction, textile printing and dyeing vessels.
Detailed application: operation channels, stair walkways, stair barriers, floors, trench covers, walkways, pedestrian bridges, equipment safety bars, scaffolding.